Beakers and Lids
Ace Glass, Inc. 20mL 24/40 Barrett moisture test receiver, jacketed sidearm, glass plug
20mL Barrett type moisture test receiver with 24/40 standard taper joints for use in determining the water content in petroleum and bituminous material. Features a jacketed side arm and is supplied with 2mm bore glass plug.
Ace Glass, Inc. Funnel, 2000mL, jacketed, pressure equalizing, addition, 29/42joints, 4mm PTFE stopcock.
2000mL jacketed pressure equalizing addition funnel with 29/42 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Ace Glass, Inc. Reactor body, glass only, photochem, 500mL, jacketed, stopcock bottom outlet
Reactor body, glass only, photochem, 500mL, jacketed, stopcock bottom outlet
Ace Glass, Inc. Immersion well, quartz, jacketed, #7 PTFE inlet, 48odx840mm
Immersion well, quartz, jacketed, #7 PTFE inlet, 48odx840mm
Ace Glass, Inc. Instatherm; griffin beaker with lip and pouring spout, 600mL, 85mm ID, 90mm OD, 124mm height, 40v/8amp max, includes9698-20 connecting controller cord
Instatherm; griffin beaker with lip and pouring spout, 600mL, 85mm ID, 90mm OD, 124mm height, 40v/8amp max, includes9698-20 connecting controller cord
Ace Glass, Inc. Beaker, 600mL, jacketed, Ace-Safe hose connections for 3/8intubing, 152mm inside height, 81mm inside diameter
600mL jacketed beaker with one upper and one lower Ace-Safe hose connection on opposite sides, for 3/8 in. tubing. Dimensions: 152mm I.H. x 81mm I.D. Does not have a pouring spout.
Ace Glass, Inc. Beaker, PTFE, thermotech bottom, 250mL
250mL molded, pure inert PTFE beaker with pour spout. Bottom surface has molded, stabilized PTFE-carbon outer surface for better heat transfer, and to handle higher temperatures up to 270C.
Electron Microscopy Sciences Low Form Beakers, Gradations: 25-200 ml. Divisions: 25 ml. Diameter: 68 mm. Height: 90 mm., 1/EA
Manufactured with uniform wall thicknesses, these beakers offer the optimum balance between thermal shock resistance and mechanical strength. All sizes have an extra large marking spot. Designed from ASTM Specification E960, Type I requirements. Has a double graduated scale to indicate approximate volume. Gradations: 25-200 ml. Divisions: 25 ml . Diameter: 68 mm . Height: 90 mm.
Electron Microscopy Sciences Low Form Beakers, Gradations: 50-500 ml. Divisions: 50 ml. Diameter: 90 mm. Height: 124 mm., 1/EA
Manufactured with uniform wall thicknesses, these beakers offer the optimum balance between thermal shock resistance and mechanical strength. All sizes have an extra large marking spot. Designed from ASTM Specification E960, Type I requirements. Has a double graduated scale to indicate approximate volume. Gradations: 50-500 ml. Divisions: 50 ml . Diameter: 90 mm . Height: 124 mm.
Ace Glass, Inc. Flask, jacketed, 2L, 100mm(4in) ground Duran; O-ring groove flange, 35/25 O-ring ball joint inlet/outlet
2L jktd cylindrical reaction flask with 100mm (4) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with 35/25 o-ring ball joints on jacket inlet/outlet connections. Flask is supplied with one CAPFE o-ring for Duran flange.
Ace Glass, Inc. 5000ML CYLINDER 5000ML CYLINDER
5000mL cylindrical graduated beaker for batch operations and mixing large volumes of measured liquids.